Want to upgrade your laser engravings or cnc carvings? Try doing a resin inlay! This technique is easy and uses tools you probably already have on hand.
New to epoxy resin work? Not to worry, I will put a link to some tutorials that will get you going including one to fix any pesky bubbles you might have below.
This video will show you how to do a resin inlay with a mat finish that is safe for charcuterie and cutting boards. You can use either bamboo or hardwood for these. Choose a food contact safe epoxy resin like Totalboat Tabletop that is BPA and VOC free. Add eye catching colors with a good quality pigment powder. Then finish with an all natural wood conditioner. Find a material list and tools with links to my favorite products below.

Want to learn more? Subscribe to our FREE newsletter on our website for a free resin project tutorial at https://jobemacstudios.net/newsletter-1
Get access to all our FREE tutorials, projects and resources for laser, cnc, woodworking and resin pouring.
Have more questions? Feel free to comment below.

Don't forget to give us a thumbs up and subscribe to our channel so you never miss more helpful tutorials like this one. Your support is greatly appreciated.

YOU MIGHT ALSO LIKE THESE TUTORIALS ~

How to Mix Resin ~    • Beginners Resin 101: Mixing Resin #re...  

How to Remove Surface Bubbles from Resin ~    • How To Remove Air Bubbles From Epoxy ...  

What Wood Finish Should I Use For Charcuterie Boards ~
   • What Wood Finish Should I Use For Cha...  

FIND ME HERE: ~ Website: https://jobemacstudios.net/
Instagram:   / 1elephantmemories  
Facebook:   / 1elephantmemories  
TikTok:   / elephantmemories  

Materials:
Links marked with * are affiliation links with products that I love and use all the time.

Hard Wood or Bamboo Cutting board
* Epoxy Resin (We used Tabletop Epoxy from Totalboat)
Use this link to order from Totalboat
https://www.totalboat.com/elephantmem...
* Pigment or Mica Powder (we used Samurai Black by Eye Candy Pigments)
Use this link to order pigment powders https://eyecandypigments.com/elephant...
* Wood hydrator and conditioner (we use Bumblechute Wood Serum and All in One Wood Conditioner)
Use this link to order wood conditioning products https://www.bumblechutes.com/?ref=1el...
Cloth rags
Small silicon brush or plastic scraper
Protective Nitrile gloves
Sandpaper (80 grit, 120 grit, 180 grit, 220 grit and 400 grit)
Denatured Alcohol

Tools:
Laser, CNC or hand tools for carving
Hand Sander (like a Festool Rotex Sander)
Air Compresser with nozzle
Butane Torch
Respirator (For Epoxy and Shellac)
Dust Mask when sanding
Eye Protection

Disclaimer & Copyright ~ Unless explicitly stated, this not a sponsored video. All opinions are honest and my own.

#resin #inlay #cuttingboard